[. . . ] Important: Do not expose this product to rain or moisture to prevent any liquid damage. Ventilation: The device should be situated so that its location or position does not interfere with its proper ventilation. [. . . ] Brush NOTE: You can use the provided brush to clean the backlight panel · To do so, place the film scanner on the side and insert the end of The brush into the door on the right side Any dust , scratch or fingerprint will be visible on your saved images. Open the film holder at the marked spot on the top and place the slides into the dedicated slots, it should fit perfectly. With the negative holder laid open place the negative into the holder so the notches line up with the notches on the holder. Insert the negative or slide holder into the slot on the right side of the film scanner as shown on the picture. Main Menu When you power on the device, it automatically goes into capture mode. In the main menu, you will find different modes and submenus: Language Setting Choose a language between English, German, Italian, Spanish, Traditional Chinese, Simplified Chinese, Japanese and French. Storage To preview or copy pictures (saved on the SD card) to a PC, connect the scanner to a PC using a USB cable. Turn on the scanner, then from the main menu, select "USB MSDC", the screen will turn black. Before entering capture mode, choose a film type or change the EV value. In "Capture", select Film Type to choose a film type and press OK to confirm. Memory type Mirror Image/Rotation Before scanning, if you need to invert or rotate your image, press the left or right keys to adjust it. Press the left key to invert the image Press the right key to flip the image When you are satisfied with the image, press "Scan" to save it. [. . . ] Neither Agfa-Gevaert NV nor AgfaPhoto Holding GmbH manufacture this product or provide any product warranty or support. For service, support and warranty information, contact the distributor or manufacturer. [. . . ]